#17417
TA/JUR.T.KIMIA 020 SAY 2023 ISBN:20 614 030
Subjects:TEKNIK KIMIA Penelitian
EVALUASI PERFORMANCE OIL SPLITTING COLUMN UNTUK MENGHASILKAN FATTY ACID DAN GLISERIN DI OLEOCHEMICAL PT. SARI DUMAI OLEO --
SAYYID AHYAR / / /Samarinda 2023
xiv;42 h ; ilus; 29 cm Bahasa:Ind
Abstrak
Penelitian ini bertujuan untuk mengevaluasi performa alat oil splitting
column dengan kode alat 111-D01 di oleochemical plant PT. Sari Dumai
Oleo. Evaluasi dilakukan dengan menghitung neraca massa dan
membandingkan nilai yield serta akumulasi antara desain dan hasil aktual.
Berdasarkan perhitungan aktual nilai yield dari tanggal 8 Juli 2023 hingga
13 Juli 2023, ditemukan bahwa nilai yield aktual lebih tinggi yaitu
91,9940% – 92,2117%, dibandingkan dengan nilai desain 91,7639%. Nilai
akumulasi aktual dari tanggal yang sama lebih kecil dari desain yaitu
0,7927% - 0,9130%, sedangkan nilai akumulasi desain adalah 0,9194%.
Nilai degree of splitting aktual dari tanggal yang sama lebih tinggi dari
desain yaitu 99,18% - 99,2%, sedangkan nilai degree of splitting desain
adalah 98%. Berdasarkan perhitungan tersebut dapat dikatakan bahwa oil
splitting column dengan kode alat 111-D01 di oleochemical plant PT. Sari
Dumai Oleo menunjukkan performa yang baik. Hal ini terlihat dari nilai
yield dan degree of splitting aktual yang lebih tinggi dari desain dan nilai
akumulasi aktual yang lebih rendah dari desain
Abstract
This study aims to evaluate the performance of the oil splitting column tool with
tool code 111-D01 at the oleochemical plant PT. Sari Dumai Oleo. Evaluation is
carried out by calculating the mass balance and comparing the yield and
accumulation values between the design and the actual results. Based on the actual
calculation of the yield value from July 8 2023 to July 13 2023, it was found that
the actual yield value was higher, namely 91.9940% – 92.2117%, compared to the
design value of 91.7639%. The actual accumulated value from the same date was
smaller than the design, namely 0.7927% - 0.9130%, while the design accumulated
value was 0.9194%. The actual degree of splitting value from the same date was
higher than the design, namely 99.18% - 99.2%, while the design degree of splitting
value was 98%. Based on these calculations it can be said that the oil splitting
column with tool code 111-D01 at the oleochemical plant PT. Sari Dumai Oleo
showed good performance. This can be seen from the actual yield and degree of
splitting which were higher than the design and the actual accumulation value
which was lower than the design.