Final_Project
#17006
TA/TI 013 HEN i 2023 ISBN:20.620.042

Subjects:Teknik Informasi Penelitian

    IMPLEMENTASI IF THEN RULE PADA KUNCI PASSWORD --

    HENDRI SAPUTRA / / /
    Samarinda 2023
    xvi; 48 H; ilus; 29 cm Bahasa:Ind

    Abstrak
    Alat kunci password elektronik dengan menggunakan arduino uno yang bekerja
    sebagai mikrokontroler untuk mengontrol input dan output pada alat kunci
    password elektronik menggunakan program yang telah dirancang untuk melakukan
    tugas-tugas tertentu berdasarkan data yang diterima dari keypad. Sistem ini
    digunakanagar keamanan ruangan terjaga. Alat ini terbagi menjadi dua bagian,
    yaitu bagian perangkat keras dan perangkat lunak. Perangkat keras terdiri dari
    keypad, Arduino Uno sebagai rangkaian pengendali input dan output, selenoid door
    lock, relay, buzzer, dan lcd 16x2 i2c. Sedangkan perangkat lunak dibuat
    menggunakan program software arduino. Data dari keypad yang berbasis tombol-
    tombol masuk ke mikrokontroler Arduino Uno yang sudah berisi program dan
    untuk Selenoid door lock tersebut akan melakukan perintah yang telah diprogram,
    apabila password tersebut salah solenoid door lock tidak akan membuka akses dan
    buzzer akan berbunyi panjang, akan tetapi jika input password tersebut benar maka
    solenoid door lock akan membuka akses dan buzzer akan berbunyi kecil. Hasil kerja
    dari sistem kunci pintu ruangan menggunakan password telah menunjukkan hasil
    yang sesuai dengan rancangan yaitu program. Dari data tersebut dapat dikatakan
    bahwa sistem ini dapat bekerja dengan baik, akan tetapi rangkaian ini masih
    prototype.
    Kata Kunci : Arduino Uno, Password, Mikrokontroler, Alat kunci password
    elektronik
    Abstract
    Electronic password lock device using Arduino Uno which works as a
    microcontroller to control the input and output of the electronic password lock
    device using a program that has been designed to perform certain tasks based on
    data received from the keypad. This system is used so that room security is
    maintained. This tool is divided into two parts, namely the hardware and software
    parts. The hardware consists of a keypad, Arduino Uno as a series of input and
    output controllers, selenoid door locks, relays, buzzers, and a 16x2 i2c LCD. While
    the software is made using the Arduino software program. Data from the keypad
    based on buttons enters the Arduino Uno microcontroller which already contains a
    program and for the door lock selenoid it will carry out the programmed command,
    if the password is incorrect the door lock solenoid will not open access and the
    buzzer will sound long, but if If the input password is correct, the solenoid door
    lock will open access and the buzzer will sound small. The work of the room door
    lock system using a password has shown results that are in accordance with the
    design, namely the program. From these data it can be said that this system can
    work well, but this series is still a prototype.
    Keywords: Arduino Uno, Password, Microcontroller, Electronic password lock
    device