#16852
TA/TMA 060 AND a 2023 ISBN:20610002
Subjects:Teknik Mesin Alat Berat BLOW; ENGINE C-15 CATERPILLAR; UNIT DRILLING
ANALISA PENYEBAB TERJADINYA BLOW BY DI ENGINE C-15 CATERPILLAR PADA UNIT DRILLING --Ed. 1
ANDI AGUN SANJAYA / / /Politeknik Negeri Samarinda Samarinda 2023
xiv., 80 hlm., 20x29 cm., ilus. Bahasa:Ind
ABSTRACT
Andi Agun Sanjaya, 2023 Analysis of the Causes of Blow By Diengine C15
Caterpillar on Unit Drilling', under the guidance of Faisyal Umar ST.,MT and
Abdul Halim,ST.,MT Final Report, Study Program D-III Heavy Equipment
Engineering, Department of Engineering Engineering, Samarinda State
Polytechnic.
The research was conducted at the Bay 1 Workshop of PT Trakindo
Utama Samarinda. The engine used for research data collection is the C15
Industrial Engine. The research was conducted in February – July 2023.
In analyzing the Engine components, data from visual inspection results,
and measurements on Engine components are compared with the manual,
including: 1. GRPTS with media number SEBF8091-10 2. Specification manual
for components with media number SENR7359-00 3. Textbook Applied Failure
Analysis, (2014) Cileungsi Training Center PT Trakindo Utama, Jakarta.
Analysis of the Causes of Engine Damage is carried out to find out
whether there is damage that has occurred and see whether the components meet
specifications or not. Based on the results of the analysis that has been carried out
and described in this report, the authors can draw the following conclusions. 1.
The piston components are not in accordance with the specifications after being
checked so they cannot be used 2. The liner components are not in accordance
with the specifications (wear) and the crosspattern line after being measured turns
out to be unusable because it does not comply with the specifications in the SIS.
Keywords: Engine C15, Blow By, Engine Components, Disassembly, Visual
Inspection, AFA