Skripsi
#16719
SKRIPSI/JUR.TM.PS.Poduksi dan Perawatan 060 NGA r 2023 ISBN:19641028

Subjects:Teknik Mesin Penelitian

    RANCANG BANGUN ALAT PEMBANGKIT LISTRIK TENAGA UAP YANG MENGHASILKAN DAYA 300 WATT DENGAN MENGGUNAKAN BAHAN BAKAR LPG --

    NGANTUNG, ALEXANDER DAVID / / /
    Samarinda 2023
    xvi; 49 h; ilus; 29 cm Bahasa:Ind

    ABSTRAK
    Penelitian ini dibuat untuk melanjutkan penelitian sebelumnya oleh Haidar
    Rahman dengan judul penelitian “Rancang Bangun Model Pembangkit Listrik
    Tenaga Uap Menggunakan Turbin Impuls”. Yang menjadi perbedaan adalah pada
    penelitia ini ialah bentuk boiler dan putaran turbin impuls ttanpa terkopel dengan
    pulley & v-belt, sehingga mampu menghasilkan listrik dengan daya 300 Watt.
    Terutama LPG dapat dimanfaatkan selain untuk digunakan pada kompor untuk
    kegiatan memasak, dapat juga dimanfaatkan untuk pengelasan dan untuk
    penggunaan alat lainnya. Dalam skripsi ini membahas prosedur mulai dari
    pembuatan alat hingga prosedur pengambilan data. Diperlukan kecepatan yang
    terlalu tinggi demi mempertahankan efisiensi yang tinggi. Dari hasil perancangan
    dan penelitian dilakukan dengan cara memanaskan boiler hingga 150? C dan
    tekanan 6 bar, lalu nozzle dibuka untuk menggerakkan turbin impuls sehingga
    didapat hasil data bahwa alat ini menghasilkan daya 459 Watt dengan putaran
    2754 rpm dan nilai efisiensi 0,12%.
    Kata kunci :
    Pembangkit Listrik, Turbin De Laval, Energi, Efisiensi.
    ABSTRACT
    This research was made to continue previous research by Haidar Rahman with
    the research title "Design of a Steam Power Plant Model Using Impulse
    Turbines". The difference is that in this research is the shape of the boiler and the
    impulse turbine rotation without being coupled with a pulley & v-belt, so that it
    can produce electricity with a power of 300 Watt. Especially LPG can be utilized
    in addition to being used on stoves for cooking activities, it can also be used for
    welding and for the use of other tools. This thesis discusses procedures ranging
    from tool making to data collection procedures. Too high speed is required to
    maintain high efficiency. From the results of design and research carried out by
    heating the boiler to 150? ?C and 6 bar pressure, then the nozzle is opened to drive
    the impulse turbine so that the data results that this tool produces 459 Watts of
    power with a rotation of 2754 rpm and an efficiency value of 0.12%.
    Keywords:
    Power Plant, De Laval Turbine, Energy, Efficiency.